Omega Carlink OMEGA-CARLINK - Check Indicator Lights; Test Installation and Activation; Complete the Installation

6
Step 6: Check the indicator lights
Locate the indicator lights on the end of the module. They are next to the
main harness. After powering up the device, you will notice the GREEN and
ORANGEindicatorlightswillashtheneventuallyturnonsolid.Solidlightsindi-
cate proper connectivity and you can proceed to the installation test.
GREEN light (power / processing):
8 Off: No power, the device is OFF.
8 Blinking: The device is working on current operations
4 Solid: The device is operating properly
ORANGE light (cellular connectivity):
8 Off: The cellular radio is OFF.
8 Slow Blinking: The device is searching for the cellular network.
8 Fast Blinking: The device has found cellular service and is waiting
to register to the network.
8 Solid w/ Fast Blinking every 1 second: The device is registered to the
cellular network but is awaiting acknowledgement.
4 Solid: Cellular service has been found with good signal strength and the
device is connected to the network with acknowledgement.
Step 7: Test installation and activation
Make sure you have the “Quick Reference Guide” with you and login to your 1.
dealer account at www.omegacarlink.com. You will need the ICC ID (aka
SIM)toactivatethedevicefortesting.Thisislocatedonthelabelafxedto
the “Quick Reference Guide” as well as on the module label.
Once you are logged in, click “Install or Diagnose” and follow the easy on-2.
screen instructions. You will also see a link for the “Dealer Portal Guide”
which gives you step by step instructions and additional info if needed.
Upon successfully completing the installation tests successfully, you will be 3.
given a 4 digit activation PIN for the vehicle owner. WRITE THE PIN IN THE
SPACE PROVIDED ON THE QUICK REFERENCE GUIDE. You can also
send the PIN to the vehicle owner by email or SMS text message.
If you know the phone number and carrier of the vehicle owner’s smart-4.
phone, you can push the mobile app to their phone via SMS text. They can
alsoeasilyndtheappintheirphone’sappstore/marketplace.
Step 8: Complete the installation
 Aftersuccessfullycompletingtheinstallationcongurationandtest,se-
curely mount the module in the selected location with tie straps, high grade hook
& loop tape, or any other reliable mounting method, and reassemble the vehicle’s
interior.
BE SURE TO GIVE THE QUICK REFERENCE GUIDE TO
THE VEHICLE OWNER. THEY CANNOT ACTIVATE OR USE
THE DEVICE WITHOUT THE ICC ID AND PIN.