18
Specifications
18-2
CONVERSION
TECHNIQUE: Dual-slope
READRATE and DISPLAY
UPDATE/Programmable
INTEGRATION TIME: 3 samples/sec: 100 msec
13 samples/sec, 60 Hz: 16.7 msec
12 samples/sec, 50 Hz: 20 msec
DISPLAY LEDs: 6, 0.54” (13.8mm)h, red, 14-segment
4, 0.12” x 0.24” (3 x 6mm), red lamp
SYMBOLS: –.8.8.8.8.8. or 8.8.8.8.8.8.
DECIMAL
POINT POSITION: Programmable
SENSOR EXCITATION
AC-POWERED: 1.5 to 11 Vdc, up to 60 mA max.
24 Vdc at 25 mA max.
DC-POWERED: 10 Vdc at 120 mA
24 Vdc at 35 mA
Can power up to 4 load cells.
OUTPUTS
(STANDARD): 4, isolated open collector; 150 mA at
1 V sink; 30 V open
BCD OUTPUT: Tri-state, TTL/CMOS compatible;
internal 5 V supply for non-isolated,
external 5 V supply for isolated.
ANALOG OUTPUT: 0-5 V, 1-5 V, 0-10 V, 0-20 mA, 4-20 mA level;
compliance, 12 V at 20 mA; 15-bit resolution;
0.1% accuracy; programmable zero and span.
To Next Page
Loading...
