Omega HH127 - System Control and Data Review; Reviewing Recorded Data (CALL Key); System Reset Function

Press buton to review recorded data: Main, secondary display shows recorded data.
Record data on (T1, T2), third
display shows the log of recorded
data, if it shows OU the memory
is already full.
＞press once to look over
each logged data, press and hold
to look over the recorded data
forward fast.
＞press once to look over
each logged data, press and hold
to look over the recorded data
backwards fast.
＞
Press to move left one
-figure that adjusted.
＞
Press to move right one
-figure that adjusted.
＞
＞＞
＞
Press once to look
over record time that the
record loggers, main display
shows year, secondary
display shows month, date,
third display shows hour:
minute.
Press or key
each time at this moment,
ca
n circulate and change
third display shows hour:
minute or: second.
＞
Press key first and then press key, carry out clear memory function, press key
again, get back to measuring state.
Back light:
Open/close LCD back light, will close automatically after opening one minute.
Function key of reset:
Take a cross screwdriver, unlock after pressing Reset key under the battery cover,
the system will pro
duce reset movement.
No press power key: The system will be produced reset.
except 0°C of cold junction compensation of the
thermocouple that set up, will all resume for the initial
state and enter and set up the function of the perpetual
calendar.
Press power key: The system is produced reset, clear
0°C of cold junction compensation of the thermocouple set
up and give out two sounds of buzzing, resume for the
initia
l state and enter and set up the function of the
perpetual calendar.
Note: Set up operation method of perpetual calendar,
please consult set up the perpetual calendar explanation.
MAX
MI N
C
F
MAX
MI N
MAX
MI N
MAX
MI N
MAX
MI N
MAX
MI N
SET
MAX
M
IN
C
F
MAX
MIN
SET
SET
9