Omega HH508 User Manual

7
SET mode (Relative value set and Hi/Lo Limits value set)
1. Press SET key to enter Relative valuse SET mode (Press ENTER key
can escape relative valuse set mode), REL set mode. _ = = =.= is
displayed (the ".=" is displayed when you set up the fourth umber).
Relative value is entered via overlay numbers, when you want to get
negative values push (- 0) key for end of numbers, then press overlay
ENTER key, stored the relative value, enter Hi/Lo Limits value set mode.
2. Hi Limit value set mode, (Press ENTER key can escape Hi Limit value set
mode), _ = = =.= is displayed (the ".=" is displayed when you set up the fourth
number), Hi Limit value is entered via overlay numbers, when you want to
get negative values push (- 0) key for end of numbers, then press overlay
ENTER key, stored the Hi Limit value, enter Lo Limit value set mode (Press
ENTER key can escape Lo Limit value set mode), _ = = =.= is displayed (the
".=" is displayed when you set up the fourth number), Lo Limit value is
entered via overlay numbers, when you want to get negative values push
(- 0) key for end of numbers, then press overlay ENTER key, stored the Lo
Limit value and exit set mode.
3. In the SET mode, the value can not >±2000.0 counts.all value will be
memorized until yor reset it.
11

Omega HH508 Specifications

General

Brand	Omega
Model	HH508
Category	Thermometer
Language	English