Setting the Temperature Controls
The power button is used to turn the wine cooler on and off. Press and Hold for approximately 3
seconds to turn it on or off. (the RUN indicator will illuminate when the cooling system is running)
Control the interior light ON/OFF
Control the temperature setting in the upper compartment. The temperature setting can be
adjusted from 5℃ to 12℃. The display shows the actual temperature of the compartment.
Press this button to adjust the temperature, the temperature display will start flashing, keep pressing to
adjust the temperature in one degree increments, when exceeding the minimum value, the display will
jump to the highest adjustable temperature value automatically. When you reach your desired
temperature you may stop pressing the button, the LED figure will stop flashing after few a seconds
and will then revert back to the actual the temperature of the upper compartment to slowly achieve
your desire setting.
Control the temperature setting in the lower compartment. The temperature setting can be
adjusted from 12℃ to 18℃. The display shows the actual temperature of the compartment.
Press this button to adjust the temperature, the temperature display will start flashing, keep pressing to
adjust the temperature in one degree increments, when exceeding the minimum value, the display will
jump to the highest adjustable temperature value automatically. When you reach your desired
temperature you may stop pressing the button, the LED figure will stop flashing after a few seconds
and will then revert back to the actual the temperature of the lower compartment to slowly achieve
your desire setting.
If the unit is unplugged, the system will return to the factory setting temperature as per below:
Upper compartment: 6 ℃
Lower compartment: 12 ℃
7
To Next Page
Loading...
