Omega OCC64TCOM - Using the Cooktop; Safety Lock Feature

8
OPERATING INSTRUCTIONS
Using the Cooktop
When the power is connected you will hear a beep and all the lights will come on for one second and then go out.
This indicates that the cooktop has entered standby mode.
Turn the cooktop on by t
ouching the On / Off button. A
ll indicators
will
show “-“.
Place a suitable pan on the cooking zone that
you wish to use. Make
sure
that the bottom of the pan and the surface of the cooking zone
are clean and dry.
Select a heat setting by touching the “+” or “-” buttons. You can
modify the heat setting at any time during
cooking. By holding down
either of these buttons, the value will adjust up or down.
Note
: If you don’t choose a heat setting within one minute, the
ceramic hob will automatically switch off.
Turn the cooking
zone off by scrolling down to “0” or touching the “+”
and “
-” buttons together.
Turn the whole cooktop off by touching
the On/Off button.
Beware of hot surfaces
“
H” will indicate which cooking zone is hot to touch. It will disappear
when the surface has cooled
down to a safe temperature.
Safety Lock
The controls can be locked to prevent accidental use and to protect children. When the controls are locked, all
buttons except for the On/Off button are disabled.
• To lock the controls, press the lock button. The timer indicator will display “Lo”.
• To unlock the controls, press and hold the lock button while the cooktop is turned on.