The dishes were not
loaded correctly.
See notes in " Loading the Dishwasher Baskets ".
Select a more intensive programme.
See" Wash Cycle Table ."
Use more detergent, or change your detergent.
Rearr ange the items so that the sp ay can rotate freely.r
Clean and/or fit the filter combination correctly.
Clean the sp ay arm jets. See "Cleaning the Spray
Arms".
r
Use less detergent if you have soft water and select
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate th ose marks.
Re-loadin g the dishes properly.
Load the dis hwasher as suggest ed in the directions.
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once t
he dishe s are barely warm to the touch. Empty the low
bas ket fir st. This prevents water form dr opping off
dishes in the upper bas ket.
In short program the washing temperature is lower.
This also lowers cleaning performance. Choose
a program with a long washing time.
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
The programme was
not powerf ul enough.
Not eno ugh deter gent
was dispensed.
Items are blocking
the path of sp ay arms.r
The filter combination
inthebaseofwash
cabinet is not clean or
is n ot correctly fitt ed.
This may cause
the sp ay arm jets
to get blocked.
r
Combination of soft
water and too much
detergent.
Aluminum utensils
have rubbed agai nst
dis hes.
Dishes block
detergent cups.
Improper loading
Too little rinse-aid
Dishes are removed
too soon
Wr ong program
has been selected
Use of cutlery with
a low-quality coating
Overflow.
Whe n some malfunctions come on, the appliance will display error code s to warn you:
Longer inlet time .
Faucets is not opened, or water intake is
restricted,or water pressure is to o low.
Som e element of dishwasher leaks .
E4
E1
E8
Open circuit or break of distributary valve.
Failure of orientation of distributary valve.
To Next Page
Loading...
