Omega OF916FKXP - Page 16

16

USING THE OVEN FUNCTION CONTROL KNOB (Fig. 20)
The oven function knob is used to control the electric fan and the oven
elements in set combinations in conjunction with the timer and thermostat.
The electric oven is heated by 4 elements:
a) Upper element (1200W) and grill element (1500W) combined at
the top of the oven cavity.
b) Lower element (1600W) at the bottom of the oven cavity.
c) Two circular elements (1200W) at the rear of the oven cavity,
situated around the 2 internal fans.
Select an oven function by turning the oven function control knob so that the
symbol for the required function is at the top and in line with the index
etched on the control panel above it.
Note: The timer and thermostat must be set correctly for the oven to
function.
To turn electric oven off adjust the oven function control knob to position
0 (no function selected). Setting the thermostat con
t rol knob to position
0 turns off the elements but it is still possible, using the oven function
knob, to turn on the electric fan and the oven light.
Fig. 20