2
、
、、
、
Router setting 
2.1 Open the browser
,
input and connect
:
http://192.168.1.1 ,Click “GO”. 
2.2 Input the username and password on the login screen(the default username and the password are 
admin)
。
 
 
    Click“OK” 
 
2.3 Router Management screen will appear(Router defauit routing mode)    
 
2.4 Set your router network name(SSID)and password (key value). 
2.5 WAN Interface Setup 
Method 1:    Automatic obtain(DHCP) 
 
Method 2: Fixed IP 
If you choose the fixed IP connection, the static IP settings page will appear. Please enter the IP address, 
Subnet Mask, Default Gateway and DNS