EasyManua.ls Logo

Omega PX409-USB - Section 2 - Hardware; 2.1 Package Inspection

Omega PX409-USB
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 2 – Hardware
It is important that you read this manual completely and follow all safety
precautions before operating this instrument.
2.1 Package Inspection
Remove the packing list and verify that you have received all your equipment.
If you have any questions about the shipment, please call our Customer Service
Department at 1-800-622-2378 or 203-359-1660. We can also be reached on the
Internet at www.omega.com, e-mail: cservice@omega.com
When you receive the shipment, inspect the container and equipment for any
signs of damage. Note any evidence of rough handling in transit. Immediately
report any damage to the shipping agent.
The carrier will not honor any damage claims unless all shipping material is
saved for inspection. After examining and removing contents, save packing
material and carton in the event reshipment is necessary.
2.2 Included Items
The following items are supplied in the box.
1 TJ-USB Probe Assembly, or 1 RH-USB Probe Assembly, or 1 UTC-USB
Universal Thermocouple Connector, PX409-USB Pressure Transducer
Assembly, or IR-USB Infrared Temperature Sensor
• 1 USB cable 6' Long (Model UTC-USB Only)
• Software and manual are downloadable from omega.com
2.3 IR-USB Accessories
The IR-USB is offered with four different accessories:
• Mounting Bracket: for wall mounting of the sensor
Air Purge Collar: used to keep the surface of the optical clean and safe from
smoke, dust, and fumes
Water Cooling Jacket: for operating in an ambient temperature above 85°C
(185°F), for temperatures up to 200°C (392°F)
Laser Sighting Accessory: for alignment of the sensor head to the target area to
make a more precise reading (see Section 2.3.2 for more information)
2-1
Hardware
2
NOTE:

Related product manuals