Omega SEAMASTER PLANET OCEAN 600M OMEGA CO-AXIAL 42 MM - User Manual

SEAMASTER
PLANET OCEAN 600M OMEGA CO-AXIAL 42MM
Titanium on rubber strap
Caliber
8500
232.92.42.21.03.001
I
Ceramic bezel
V
Co-Axial escapement
H
Titanium
]
Si14 silicon balance spring
l
Automatic
U
Chronometer
i
Time zone function
o
Sapphire crystal
t
Anti-reflective treatment on both sides
D
Sapphire crystal case back
d
Screw-in crown
q
Helium escape valve
B
Liquidmetal®
é
Water-Resistant to a relative pressure of 60 bar
(600 metres/2000 feet)
WATCH FUNCTIONS
The crown has 3 positions:
1. Normal position (wearing position): when the crown is positioned against the
case, the crown ensures that the watch is water-resistant.
Occasional winding: if the watch has not been worn for 60 hours or more, wind it
up with the crown in position 1.
2. Setting the time zone and correcting the date: pull the crown out to position
2. Turn the crown forwards or backwards, and the hour hand will move forwards or
backwards by 1-hour intervals. By passing the hour hand over midnight, the date
can be changed forwards or backwards. Push the crown back to position 1.
NB: when changing the time zone backwards, it is necessary to move the hour
hand back past 7 pm to ensure the date changes.
3. Time setting: hours – minutes – seconds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown forwards or backwards. Synchronise the
seconds by pushing the crown back to position 1 to coincide with a given time
signal.
1 / 2

Omega SEAMASTER PLANET OCEAN 600M OMEGA CO-AXIAL 42 MM Specifications

General

Model	SEAMASTER PLANET OCEAN 600M OMEGA CO-AXIAL 42 MM
Brand	Omega
Category	Watch
Case Size	42 mm
Water Resistance	600 meters
Case Material	Stainless Steel
Dial Color	Black
Bracelet Material	Stainless Steel
Crystal	Sapphire
Power Reserve	60 hours
Chronometer	Yes
Bezel	Unidirectional rotating bezel
Movement	Automatic
Caliber	Omega 8900

Summary

Watch Functions

Normal Position and Winding

Crown in normal position ensures water-resistance. Used for occasional winding.

Setting Time Zone and Date

Adjust hour hand in 1-hour intervals via crown for time zones and date changes.

Precise Time Setting

Pull crown to position 3 to stop seconds hand for synchronization with a time signal.

Helium Escape Valve Operation

Foldover Clasp Adjustments

Fine Length Adjuster

Utilize the fine length adjuster on the clasp for precise bracelet sizing.

Diving Extension

Extend the clasp for a larger fit, typically worn over a diving suit.