25
IF THE AUGER STOPS WORKING
CAUTION WHEN USING OPERATION BUTTON
To STOP the operation, press the [Rev]
button quickly. The auger will rotate slowly
then stop. After the auger rotation stops
completely, you can press [ON] to continue
operation as normal or hold down the [Rev]
button to push ingredients upward.
Press [ON] button to start. When using
[ON] auger should rotate. Wait 2 to 3
seconds. Then presss [REV] button. Repeat
this 2 to 3 times. Make sure the auger stops
completely after releasing the button.
Note:
Even after following the directions above,
if the juicer still doesn’t work, please
unplug the power cord, disassemble the
chamber set and clean it. Then try again.
Press [Rev] button for 3 to 5 seconds,
then release. When the [Rev] button is
released, the auger will stop rotating.
Repeat this 2 to 3 times.
The [Rev] button pushes the ingredients
upward releasing the food clog.
2
1
[Rev]
[Stop]
[On]
[Rev]
[On]
To Next Page
Loading...
