Omlet Eglu Go Up User Manual

www.omlet.co.ukPage 1
Contents of Extension box
Page 1 www.omlet.co.uk
Fixings Bag
73x Run Clip
810.0013
7x Double Run Clip
810.0001
PLEASE READ CAREFULLY
Eglu Go Up Extension Instruction Manual
Step 1 - Unclip the end of your run
Top Panel Front
017.1085
x2
Skirt Extension
017.1100
x2
Run Extension Support
017.1101
x2
Side Panel
017.1084
x4
If you already have a complete Eglu Go Up run,
you will need to unclip the end and corner skirts.
(Keep the clips, you will need them later.)
Also, remove the feeder and drinker.
Your run will then look the picture to the right.
If you are building an extended Eglu Go Up
proceed to Step 2.
# 820.1208

Omlet Eglu Go Up Specifications

General

Brand	Omlet
Model	Eglu Go Up
Category	Outdoor Storage
Language	English

Summary

Eglu Go Up Extension Parts Identification

Fixings Bag Contents

Details the clips included: 73x Run Clips and 7x Double Run Clips.

Skirt Extension Part

Identifies the Skirt Extension, part 017.1100, with 2 required.

Run Extension Support Part

Identifies the Run Extension Support, part 017.1101, with 2 required.

Top Panel Front Part

Identifies the Top Panel Front, part 017.1085, with 2 required.

Side Panel Part

Identifies the Side Panel, part 017.1084, with 4 required.

Eglu Go Up Extension Assembly Steps

Step 1: Unclip Existing Run

Instructions to unclip end and corner skirts, and remove feeder/drinker.

Step 2: Attach Side Panels and Supports

Attach 2 Side Panels and 1 Run Extension Support to the run.

Step 3: Attach Top Panels

Instructions to clip on 2 Top Panels to the extended run.

Step 4: Attach Extension Skirt Panels

Instructions to clip on 2 Skirt Extensions to the run.

Step 5: Re-attach End Panels

Re-attach the end of the run using the original clips.

Run Clip Locations Diagram

Clip Key Identification

Illustrates and identifies Single Clip and Double Clip types.