Need help?Do you have a question about the Omni M-505 and is the answer not in the manual?
General| Brand | Omni |
|---|---|
| Model | M-505 |
| Category | 3D Printers |
| Language | English |
Key instructions and precautions before starting the assembly process, including package integrity and assembly care.
A visual inventory of all components included in the 3D printer kit, essential for verifying completeness.
Initial assembly step focusing on identifying and preparing acrylic components by removing protective paper.
Assembly of the main framework using acrylic parts A, B, C and specified screws and nuts.
Securing the framework and assembling the Z-axis motor support using parts H1, H2, D, I1, I2, J1-J4.
Assembly of the Y-axis screw arbors using part E, screw arbors, nuts, and cushion rings.
Attaching the Y-axis front base frame using parts F and U with screws and nuts.
Installation of the Y-axis rods and bearings, likely involving parts K and other specified hardware.
Mounting the Y-axis belt and fixing the Z-axis limit switch using parts L, M, R, P and screws.
Installation of the Y-axis and Z-axis motors, along with the drive belt.
Assembly of the hot bed and its associated components, including springs and nuts.
Installation of the Z-axis rods and print parts, completing the vertical axis structure.
Assembly of the extruder unit, including the motor, fan, and mounting hardware.
Installation of the X-axis motor and the corresponding drive belt.
Mounting of the X, Y, and Z axis limit switches for printer homing.
Installation of the LCD screen and its cover, connecting it to the main board.
Connecting the power supply unit and power cable, ensuring correct voltage selection.
Overview of mainboard connections for motors, limit switches, sensors, and display.
Assembly of the feeding frame using parts V, W, X and associated nuts and screws.
To Next Page