-Always unplug the unit before cleaning or servicing.
-DO NOT use flammable liquids or chemicals to clean the unit.
-DO NOT wash the unit under running water. This may cause an electrical danger.
-DO NOT operate the machine if the power supply was damaged during cleaning. A damaged
power cord must be replaced with a new cord from the manufacturer.
Safety Precautions
Clean the unit using a damp, lint-free cloth and mild detergent. Dry the unit with a dry, lint-free
cloth.
Cleaning the unit
-Drain the unit’s water collection tray according to the instructions in the following section.
-Run the appliance on FAN mode for 12 hours in a warm room to dry it and prevent mold.
before storing.
-Remove the batteries from the remote controller.
Be sure to store the unit in a cool, dark place. Exposure to direct sunlight or
extreme heat can shorten the lifespan of the unit.
Storing the Unit when not in Use
21
Air Filter Cleaning
Upper filter
(take out)
Removal
- Take the filter out along the arrow direction.
Cleaning
- Wash the air filter by immersing it gently in warm water
( about 40 °C/104 °F ) with a neutral detergent. Rinse
the filter and dry it in a shady place.
Mounting
- Install the air filter after cleaning .
CAUTION
DO NOT operate the unit without filter
because dirt and lint will clog it and reduce
performance.
Maintenance Tips
- Be sure to clean the air filter every 2 weeks for
optimal performance.
- The water collection tray should be drained
immediately after P1 error occurs, and before
storage to prevent mold.
- In households with animals, you will have to
periodically wipe down the grill to prevent
blocked airflow due to animal hair.
MAINTENANCE
To Next Page
Loading...