25
Function Buttons
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the How to Use Basic Functions section of this manual.
SHORT CUT
Sets and activates your
favorite pre-settings.
ON/OFF
Turns the unit on or off.
MODE
Scrolls through operation
modes as follows:
AUTO
COOL DRY
HEAT FAN
FAN SPEED
Selects fan speeds in
the following order:
AUTO
LOW
MED
HIGH
SLEEP
Saves energy during
sleeping hours.
TEMP
Increases temperate in
OO
1 C(1 F) increments.
Max. temperature is
OO
30 C(86 F) .
TEMP
Decreases temperate in
OO
1 C(1 F) increments.
Min. temperature is
OO
17 C(62 F) .
TIMER ON
Sets timer to turn unit
on (see How to Use
Basic Functions for
instructions)
TIMER OFF
Sets timer to turn unit
off (see How to Use
Basic Functions for
instructions)
SWING
Starts and stops louver
movement.
LED
Turns indoor unit s LED
,
If you are sensitive to
light when you go to
sleep, you can press the
LED button to turn off
the LED display on the
unit. Press the button
again to turn it back on.
display on and off.
NOTE Please do not select
HEAT mode if the machine you
purchased is cooling only type.
Heat mode is not supported by
the cooling only appliance.
NOTE: Press and hold
and buttons together for
3 seconds will alternate the
temperature display
OO
between the C & F scale.
Temperature
sensing and room
temperature display
button
I SENSE
REMOTE CONTROLLER INSTRUCTIONS
To Next Page
Loading...