Omni OP14NRWBA4RCM - Unit Cleaning and Storage

28
1. Press the MODE button to select
COOL mode.
2. Set your desired temperature using
the Temp or Temp button.
3. Press the FAN button to select the
fan speed: AUTO, LOW, MED,or
HIGH.
4. Press the ON/OFF button to start the
unit.
In AUTO mode, the unit will automatically
select the COOL, FAN, HEAT or DRY mode
based on the set temperature.
1. Press the MODE button to select Auto mode.
2. Set your desired temperature using the
Temp or Temp button.
3. Press the ON/OFF button to start the unit.
,
NOTE: FAN SPEED can t be set in Auto mode.
SETTING TEMPERATURE
The operating temperature range for units is
OOO
17-30 C(62 F-86 F). You can increase or
OO
decrease the set temperature in 1 C(1 F)
increments.
1
3
2
1
3
2
4
How To Use The Basic Functions
COOL operation
AUTO operation
REMOTE CONTROLLER INSTRUCTIONS