39
Enter the verification
code, the verification
is successful and
automatically enter the
next step
3
Enter a password, format:
8-20 letters and numbers.
and then click “Complete”
4
5
NETWORK CONFIGURATION
Cautions
Kindly reminder:
The user must complete all steps within 8 minutes after the air conditioner enters the distribution
mode, otherwise the user needs to re-distribute the network according to the following steps.
It is necessary to forget any other around network and make sure the Android or iOS phone must
connect to the Wireless network you want to configure.
Make sure the Android or iOS phone Wireless function works well and can be connected back to
your original Wireless network automatically.
Note:
Using Android or iOS device to do network configuration
There are two ways to finish the network configuration:
Network configuration by Bluetooth scan
Network configuration by select appliance type
Make sure your mobile phone has already been connected to the 2.4G wireless network which
you want to use. Also, you need to forget other irrelevant wireless network in case it influences
your configuration process.
Power on the device and wait 5 seconds
①
Turn on the device after connecting the power supply.
②
Press and hold the “Power On” or “SWING” or APP control button more than 3 seconds, or
press the “LED Display” button on the remote 7 times until the device shows “AP” on the display.
Description: The specific model may be slightly different, the user can operate according to the
actual network distribution guidelines prompted by the App.
SMART FEATURES SET UP AND USE
To Next Page
Loading...