8
Virtuix Omni Operator Manual | Version 2.4| 7/25/2017
Training Script: Provide staff members with a physical copy of the training script (see Appendix
A) and ask them to rehearse this training script.
3.2. Cleaning The Base
Cleaning The Base: Keep the Omni Base clean (free of dust and particles) at all times to ensure
smooth movement. Clean the Omni Base with a dry or damp towel before each gameplay
session. In case of dirt build-up, a deep-clean with water + soap and a rough cleaning sponge is
recommended.
No Wet Wipes: Wet wipes should never be used to clean the Omni Base, as they leave behind a
residue that increases the Base friction. Just use water or a combination of water and soap.
No Petroleum Based Products: No petroleum based products should ever be used to clean the
Base. Water/soap is preferred; silicon spray can be used to restore the Base’s slipperiness in
case of high-friction build-up.
3.3. Best Practices
Clean HMD Lenses: Use a lens cleaning cloth to clean the HMD lenses before each use.
Additionally, the use of Vive HMD covers are a necessity for hygiene reasons.
IPD: The Vive has a turning knob at the bottom right to adjust the distance between the lenses;
the average is a distance of 65mm for a comfortable experience. Be sure to verify the HMD’s IPD
setting before each gameplay session, and adjust this setting back to the average of 65mm in
case players have changed this setting during their session. Suggest to players to adjust the IPD
for their eyes specifically when they have put on the headset by turning the knob on the bottom
right side of headset.
To Next Page
Loading...