Press the button in the
Smart Switch 3 times for
on/off function, Or 2 times
for pulse function, such as
doorbell.
Button
Pair RF433 Remote Control
Clear all the RF433 remote control setting
You can turn ON/OFF the light via the standard wall switch ONLY when the Smart Switch is on.
However, if the light is turned off by APP, the remote
control or the Alexa, and you wanna control the light via
the standard wall switch you need to activate the light.
Turn on the light
Wait for 3 seconds,
Press any button in
the remote control
one time, and wait
for 2 seconds
the light in Smart
Switch will turn red
Button
Press the button in Smart Switch 8 times
in rapid succession.
Indicate Light
To Next Page
Loading...
General