18
CARE AND CLEANING
Container:
Rinse the jug after each use with warm water. To prepare your new machine for initial use, follow the steps
under Normal Cleaning. This will clean the unit, and break-in the motor.
Normal Cleaning:
1. Fill one third of the jug with warm water and add a couple drops of dish wash liquid.
2. Snap or push the complete 2-part lid into locked position.
3. Turn machine on and select the 35 second cycle.
4. After the machine has completed the cycle, rinse and drain the jug. Leave upside down, to air dry.
Deep Clean:
Once a month, or as needed
1. Place 3 cups of cool water and 3 cups of white vinegar into the container (add an extra cup of water and
vinegar for a 2ltr jug).
2. Leave to soak for about four hours.
3. Pour contents out and rinse thoroughly.
4. Follow the appropriate cleaning instructions above.
To Next Page
Loading...
Need help?
General
