OmniBlend JTC OmniBlend V User Manual

6
AUTOMATIC OVERLOAD PROTECTION
The Automatic overload protection is a built-in feature which is designed to protect the motor and prevent
your machine from overheating. If the Overload Protection kicks in, the machine will stop operating
suddenly. Leave the machine to cool down for 5 to 10 minutes, and then (while the machine is still connected
to power), press the Overload Button on the bottom of the machine. The machine will now work as normal
again.
Overload Button

OmniBlend JTC OmniBlend V Specifications

General

Brand	OmniBlend
Model	JTC OmniBlend V
Category	Blender
Language	English