Omnitracs AMG-C User Manual

AMG-C Diagnostic LED Light Quick Reference Guide
The diagnostic LED light indicators are located on the side of the AMG-C. Remove the cover to view the diagnostic
lights.
Each light is labeled. See the following sections to learn more about the operation of each indicator.
Power/VIOP LED
The PWR LED is known as either the Power LED or the VIOP LED. This is used to provide details of OS, App, and
VIOP states.
Off: Power Off
Blinking Red: VIOP POST Boot Test failed
Blinking Red/Green/Blue: VIOP POST Boot Test in progress (occurs briefly after a power on)
Blinking Green/Blue: OS Booting
Blinking Blue: PAPI link up, app not fully launched (not seen in normal operation)
Blinking Green: App is up, normal operation, Ignition OFF
Solid Green: App is up, normal operation, Ignition ON
Blinking Green/Red: Bus abnormal/off condition
https://kb.omnitracs.com/Omnitracs_One/AMG-C/Beta/User_Manual/AMG-C_Diagnostic_LED_Light_Quick_Reference_Guide
Updated: Wed, 05 Aug 2020 19:25:26 GMT
Powered by
1

Omnitracs AMG-C Specifications

General

Brand	Omnitracs
Model	AMG-C
Category	Gateway
Language	English

Summary

Power VIOP LED States

Power VIOP LED Off

The PWR LED is off, indicating the device is powered down.

Power VIOP LED Blinking Red

Indicates VIOP POST Boot Test failure.

Power VIOP LED Blinking Red Green Blue

Indicates VIOP POST Boot Test in progress after power on.

Power VIOP LED Blinking Green Blue

Indicates the Operating System is booting.

Power VIOP LED Blinking Blue

PAPI link up, app not fully launched (abnormal).

Power VIOP LED Blinking Green

App is up, normal operation, Ignition OFF.

Power VIOP LED Solid Green

App is up, normal operation, Ignition ON.

Power VIOP LED Blinking Green Red

Indicates a bus abnormal or off condition.

Power VIOP LED Blinking Red Blue

VIOSIP Link down for more than 10 seconds.

Power VIOP LED Blinking Red

Low voltage detected, shutdown in progress.

Power VIOP LED Solid Red Blue Blink

Boot fail sleep (max launch retries exhausted).

Power VIOP LED Solid Red

VIOP running in ISP mode, VIOP update in progress.

GPS LED States

GPS LED Off

The GPS LED is off, indicating no GPS connection state.

GPS LED Solid Red

Indicates GPS failure or initial non-initializing state.

GPS LED Blinking Red Green

GPS is initializing or attempting a recovery.

GPS LED Blinking Green

Low Precision / 2D GPS Fix, attempting 3D GPS Fix.

GPS LED Solid Green

GPS Fix achieved with good precision.

Cellular LED States

Cellular LED Off

The Cell LED is off, indicating no cellular connection state.

Cellular LED Solid Red

Indicates cellular connectivity failure or initial state.

Cellular LED Blinking Red Green

Cellular modem initializing or attempting a recovery.

Cellular LED Blinking Green

End-to-end cellular test in progress.

Cellular LED Solid Green

End-to-end cellular test passed, good connectivity.

Bluetooth LED States

Bluetooth LED Off

The BT LED is off, indicating no Bluetooth connection state.

Bluetooth LED Solid Red

Indicates Bluetooth chip failure or initial state.

Bluetooth LED Blinking Red Green

Bluetooth chip initializing or attempting a recovery.

Bluetooth LED Blinking Green

Bluetooth initialized, but device not paired.

Bluetooth LED Solid Green

Bluetooth device is paired.

WiFi LED States

WiFi LED Off

The WiFi LED is off, indicating no WiFi connection state.

WiFi LED Solid Red

Indicates WiFi chip failure or initial state.

WiFi LED Blinking Red Green

WiFi chip initializing or attempting a recovery.

WiFi LED Blinking Green

WiFi initialized, ready for connection.

WiFi LED Solid Green

WiFi is connected to an access point or hotspot.