Omnitronic BDT-5.0 - Page 27

The TV sound will come out
of the loudspeaker.
3
Speaker 1
Speaker 2
TX OPT 16
2
Power on.
Press 3 sec.
Speaker 1
Speaker 2
BYPASS OPT 16
Select BYPASS mode.
BYPASS
AUX AUX
OPTICAL OPTICAL
RX Output TX Input
TV
Ÿ Bypass mode works only with the same type of connection, i.e. AUX input to AUX
output and optical input to optical output.
Ÿ Please set the audio format to PCM on the TV for optical audio output, Dolby/DTS
is not supported.
27
English