Omnitronic GNOME-202P User Manual

10
•
EN
4
Operation
First turn down the
MASTER control and
leave the power of all
devices off.
Make all necessary audio
and power connections to
the mixer. Then turn on
power for all devices.
To use an audio source
at the LINE 1 input, set
the input selector for
channel A to LINE 1.
Set the MASTER control
and the crossfader to
mid-position to start.
Adjust the desired
channel level with both
GAIN controls.
Optimize the sound with
the HIGH and LOW
controls and adjust the
overall volume with the
MASTER control if
needed.
Use the crossfader to
blend both channels.
To use a Bluetooth
device or USB flash
drive, set the input
selector for channel A
to BT/USB.
For Bluetooth operation
press the PAIRING
button to enter pairing
mode and connect the
Bluetooth device to
GNOME-202P. The
music is now played
wirelessly via the mixer.
To disconnect press the
PAIRING button again.
For USB operation insert
a USB drive into the USB
port and use the PLAY/
STOP,  and  buttons
for playback control. The
display shows various
information about the
title.
GNOME

Omnitronic GNOME-202P Specifications

General

Brand	Omnitronic
Model	GNOME-202P
Category	DJ Equipment
Language	English