Product Description
Version 1.1, June 22, 2006 Proprietary to OmniVision Technologies 9
O
mni ision
Note:
• All information shown herein is current as of the revision and publication date. Please refer
to the OmniVision web site (http://www.ovt.com) to obtain the current versions of all
documentation.
• OmniVision Technologies, Inc. reserves the right to make changes to their products or to
discontinue any product or service without further notice (It is advisable to obtain current product
documentation prior to placing orders).
• Reproduction of information in OmniVision product documentation and specifications is
permissible only if reproduction is without alteration and is accompanied by all associated
warranties, conditions, limitations and notices. In such cases, OmniVision is not responsible
or liable for any information reproduced.
• This document is provided with no warranties whatsoever, including any warranty of
merchantability, non-infringement, fitness for any particular purpose, or any warranty
otherwise arising out of any proposal, specification or sample. Furthermore, OmniVision
Technologies Inc. disclaims all liability, including liability for infringement of any proprietary
rights, relating to use of information in this document. No license, expressed or implied, by
estoppels or otherwise, to any intellectual property rights is granted herein.
• ‘OmniVision’ and the OmniVision logo are registered trademarks of OmniVision Technologies, Inc.
‘CameraChip’ is a trademark of OmniVision Technologies, Inc. All other trade, product or service
names referenced in this release may be trademarks or registered trademarks of their respective
holders. Third-party brands, names, and trademarks are the property of their respective owners.
For further information, please feel free to contact OmniVision at info@ovt.com.
OmniVision Technologies, Inc.
1341 Orleans Drive
Sunnyvale, CA USA
(408) 542-3000
To Next Page
Loading...
Need help?
General