EasyManua.ls Logo

Omron CS1 - Page 36

Omron CS1
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24 Programmable Controllers SYSMAC CS1G/H
Note: Either of the serial communications modes listed in the following table can be used to connect CX-One Support Software (e.g., the CX-Programmer) to a
CS1-series PLC.
Programming Console
Connecting Cables for NS-series PTs
Serial communications mode Features
Peripheral bus
This mode can provide high-speed communications, so this mode is normally used to connect when using CX-One component
software such as the CX-Programmer.
Supports 1:1 connections only.
The Programming Device’s baud rate
Host Link (SYSWAY)
This is a general host computer communications protocol, which supports 1:1 and 1:N connections.
Host link operates at a slower speed than peripheral bus.
Host link supports 1:N connections as well as long-distance connections when RS-422A/RS-485 is used for a connection
through a modem or optical adapter.
Product name Specifications
Cable model
(Separate item)
Connection configuration Model Standards
Programming Console
Can be connected
to the CPU Unit’s
peripheral port
only. Cannot be
connected to the
RS-232C port.
A CS1W-KS001-E
Programming
Console Key
Sheet is required
(sold separately).
CS1W-CN224: 2 m
CS1W-CN624: 6 m
C200H-PRO27-E U, C, N, CE
Programming Console Key
Sheet
For the following Programming Consoles: C200H-PRO27 CS1W-KS001-E
CE
Programming
Console
Connecting
Cable
For C200H-PRO27 connection, Cable length: 2 m CS1W-CN224
For C200H-PRO27 connection, Cable length: 6 m CS1W-CN624
Product name
Specifications
Model Standards
Connection configuration Cable length
Connecting Cables for
NS-series PTs
Connecting Cables between an NS-series PT and the RS-232C port of CPU Unit
or Serial Communications Board/Unit
2 m
XW2Z-200T
---
5 m
XW2Z-500T
Connecting Cables between an NS-series PT and the peripheral port of CPU Unit
2 m
XW2Z-200T-2
5 m
XW2Z-500T-2
Programming
Console
C200H-PRO27
Programming
Console
Key Sheet
CS1W-KS001
Peripheral port
CS1W-CN224 (2 m)
CS1W-CN624 (6 m)
RS-232C Cable
XW2Z-200T (2 m)
XW2Z-500T (5 m)
RS-232C
CPU Unit's built-in
RS-232C port
Serial
Communications
Board's
NS-series PT

Related product manuals