Programming Software – HMIs
Time is money – easy to use software with powerful features
to greatly reduce your development efforts.
The CX-Designer can be started from the CX-Integrator’s
NT Link Window. Of course, settings such as the PLC and Unit
information are passed to the CX-Designer, so you can start
developing screens immediately after CX-Designer starts.
HMI Development Environment Integrated with
Connectivity to the CX-Integrator
• The recipe data created in Excel can be
displayed in table format.
• The desired process can be selected in the
window and the data can be written together
to the PLC addresses.
Recipe Functions Even Easier to Use
The Ver. 6.2 recipe function (data block function) provides even
more flexibility when switching between production processes.
Note: Project data can be called up from the File Menu.
• Recipe data can be input and edited in Microsoft Excel.
When the onsite system has changed, the data can be
transferred by sharing the CSV file in a Memory Card
or over the internet.
• The CSV files can be transferred directly to the computer
with the FTP function.
• Any setting for any process can be extracted
and written to a PLC address.
• Any processes can be combined and written
to PLC addresses together.
• Processes can be specified in the window using
indirect specification. Processes 1, 15, and 20
can be combined and transferred together.
A. Writing process recipe data as a batch.
B. A single process recipe data can be displayed and edited.
C. Writing multiple process combinations altogether.
2
1
Internet
Memory Card
Recipe
Data
Recipe
Data
Recipe
Data
To Next Page
Loading...
