Need help?Do you have a question about the Omron CX-INTEGRATOR - V1.1 and is the answer not in the manual?
Outlines critical safety measures and warnings for using the software and hardware.
Details precautions for specific applications and network types like DeviceNet.
Lists locations and conditions to avoid for proper installation and operation.
Introduces the CX-Integrator software and its core capabilities.
Guides through the installation process of CX-Integrator.
Details cables and diagrams for direct serial connections to PLCs.
Describes the various windows and user interface elements of CX-Integrator.
Outlines the general procedures for using CX-Integrator.
Explains the concept of connecting online to a relay PLC as a prerequisite.
Introduces offline creation of network configurations for DeviceNet and CompoWay/F.
Explains how to set, upload, download, and compare component parameters.
Introduces online operations possible for the target PLC.
Defines routing tables, local network tables, and relay network tables.
Covers the process of setting and configuring routing tables.
Guides on creating FINS local routing tables using online operations.
Details the procedure for transferring created routing tables to PLC1.
Explains the concept of data links and manual/automatic settings.
Details the process of manually setting up data links and creating tables.
Guides on creating data link tables using the Datalink Wizard and Node Editing Window.
Details methods to transfer data link tables to PLC nodes on the network.
Covers settings for automatically configured data links.
Explains how to search for OMRON nodes on an Ethernet network.
Introduces the ping test for checking PLC connection status on Ethernet.
Covers setting operations unique to DeviceNet networks.
Covers editing parameters for DeviceNet slaves, requiring EDS files.
Covers adding slaves to the DeviceNet master.
Covers editing master device parameters like I/O allocations and communication settings.
Describes manual I/O allocation procedures for DeviceNet.
Explains how to write master and slave parameters to network devices.
Covers uploading device parameters and verifying network configuration.
Explains how to monitor devices and communications.
Explains how to set device parameters using class instances for devices without EDS files.
Explains the three system configurations for CompoWay/F communications.
Details communication procedures with CompoWay/F slaves connected via a PLC.
Explains how to set parameters for CompoWay/F slaves like Temperature Controllers.
Guides on transferring network information from slaves connected directly to the computer.
Explains the automatic detection and setup for NS-series PTs connected via NT Link.
Introduces transferring screen data from NS-series PTs via CS/CJ-series PLC.
Describes the tool for diagnosing Controller Link networks and their components.
Introduces the internode echoback test for PLC nodes.
Explains the Ethernet ping test for verifying PLC connectivity and settings.
Explains the management of Component and Network Profile Sheet (CPS) files.
Explains the management of Electronic Data Sheet (EDS) files for device support.
To Next Page
General