6-10 Creating and Editing I/O Comments
6-9-6 Starting Remote I/O Communications
6-10 Creating and Editing I/O Comments
Component - Edit I/O Comment
The CX-Integrator can be used to add comments to I/O data of slaves.
The I/O comments can be checked while making I/O allocations to the master.
Note
No I/O comments can be created or edited for a device if the device is not designed to
have I/O data.
To edit I/O comments, use the following procedures.
1. Select the device.
2. Select Component - Edit I/O Comment (or select the slave, click the right mouse
button, and select Edit I/O Comment).
The following dialog box will be displayed.
An I/O comment can be created for each connection supported by the device. If
areas have been already allocated to the master, they will be displayed.
Note
• If an area is not allocated to a master, the display will show 0000, the default area.
• Edited I/O comments can be exported in the CSV format by selecting Export and I/O
Comment List. Part of I/O comment data exported in the CSV format can be opened
in spreadsheet software and used for CX-Programmer variable tables.
6-43
To Next Page
Loading...
Need help?
General