5 Guide to Version Upgrade
5 Guide to Version Upgrade
The following table shows the changes in the upgrade from CX-Integrator
Ver. 1.0 to Ver. 1.1.
Item Previous (Ver. 1.0) Ver. 1.1
CP1H supported as PLC model
No Yes
Automatic
online
connection
Automatic
USB
connection
No
Yes. When Automatic USB
Connection is selected from the
Network Menu, the PLC model
(such as the CP1H) is
automatically recognized and
connected online.
Ethernet network PING test
No Yes
Echoback test between nodes
on Ethernet, Controller Link,
SYSMAC LINK, and DeviceNet
No Yes. (Response time can be
measured.)
Controller Link network
diagnosis Repeater display
No Branching information can be
displayed by Repeater Units.
Start Special Application
No It is possible to select an Inverter
on DeviceNet, and to start the
CX-Drive.
Support for NSJ Series
No Yes
xxi
To Next Page
Loading...
Need help?
General