!
Programming Software - PLCs
One programming software for all Omron PLCs, with integrated
management of all hardware configuration.
The CX-Programmer Ver. 6.0, which is bundled with the CX-One
FA Support Tool Package, has evolved from its earlier role as
a PLC Programming Device with the added role as parameter
setting software for PLCs, Special I/O Units, and CPU Bus Units.
Operations from the PLC I/O Tables
When the PLC I/O Table Component starts, each Unit’s settings
and parameters can be read, changed, and compared online
to the actual Units, so system design time and startup time can
be reduced.
Information such as the model number, product name, unit
version, and unit number are clearly displayed in the I/O table.
CPS Files Improve and Simplify Communications Unit Settings
• When a Special I/O Unit or CPU Bus Unit Edit Parameters Dialog Box is started from
an I/O Table, the present settings are called up in the dialog box. The information
from the CPS file clearly shows each parameters function and setting range, so it
isn’t necessary to refer to the manual when setting the parameters.
• The settings are compared online with the actual Units connected at that time.
Any mismatched settings are displayed in orange.
1
DeviceNet/Profibus
Controller Link
CompoWay/F MECHATROLINK-II
To Next Page
Loading...
