E-8 Rotary Encoders
Dimensions (Unit: mm)
Sensors
Standard
E6C2-CWZ##
Solid 8 dia. Shaft Model
E6C3-CWZ##H
120˚120˚
38 dia.
Three, M3 holes Depth: 7
Origin of phase Z
Note:
2-m-long, oil-resistive PVC cable, 5-dia.
(conductor cross-section: 0.2mm
2
, insulator: 1.0 dia.)
five conductors and shield
(eight conductor for line driver use)
(see note)
(60)
(6.59)
40
15
5
10
1.6
1
50 dia.
25 dia.
0
-0.021
6 dia.
0
-0.021
8 dia.
+
0
−0.018
5 dia. oil-proof PVC, shielded 5-conductor cable (8-conductor for line driver)
(conductor cross-section: 0.2 mm
2
; insulation diameter: 1.1 mm)
Standard length: 1 m
6
8.8
6
12 dia.
50 dia.
1
1
5
D cut: Phase-Z postion (range: ±15°)
10
40 dia.±0.1
10
Three, M4 holes
Depth: 5
120°±0.1
120°±0.1
30 dia.
+
0
−0.021
(15)
38
20
(58)
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. F01E-EN-01
F502-EN2-04.book Seite 8 Dienstag, 26. Juli 2005 5:48 17
To Previous Page
Loading...
