Ultra-slim Signal Converter K3FP Series 1
Ultra-slim Signal Converter
K3FP Series
Complete Lineup of Ultra-slim, High-
performance Converters for Every
Application
• Ultra-slim 6.2-mm size.
Close mounting makes devices more compact.
• Easily wired and flexible with 8 terminal blocks.
• Multi-range I/O provides flexibility for the desired signal format.
• High-precision analog conversion with minimum current
consumption.
• Reduced wiring through power supply connection with DIN rail
bus connector (optional).
Product Selection
Product Model Input signal Output signal Power supply
voltage
Reference
page
3-Way Signal Isolator K3FP-YV-I-I 0 (4) to 20 mA DC 0 (4) to 20 mA DC 24 V DC 3
3-Way Signal Isolator K3FP-YV-U-U
−10 (0) to 10 V DC −10 (0) to 10 V DC 24 V DC
3-Way Signal Isolator K3FP-VS-UI-UI 0 to 20 mA DC, 4 to 20 mA DC,
0 to 10 V DC, 2 to 10 V DC,
0 to 5 V DC, 1 to 5 V DC
(selected by DIP switch setting)
0 to 20 mA DC, 4 to 20 mA DC,
0 to 10 V DC, 2 to 10 V DC,
0 to 5 V DC, 1 to 5 V DC
(selected by DIP switch setting)
24 V DC 6
Dual Output 3-Way Signal
Isolator
K3FP-VS-UI-2I 0 to 20 mA DC, 4 to 20 mA DC,
0 to 10 V DC, 1 to 5 V DC
(selected by DIP switch setting)
0 to 20 mA DC, 4 to 20 mA DC
(selected by DIP switch setting)
24 V DC 10
Loop-powered Isolator
(1-channel)
K3FP-SN1-I-I 0 (4) to 20 mA DC 0 (4) to 20 mA DC --- 14
Loop-powered Isolator
(2-channel)
K3FP-SN2-I-I 0 (4) to 20 mA DC 0 (4) to 20 mA DC ---
Thermocouple Transducer K3FP-TS-UI Type J and K Thermocouples
(Conforms to IEC 60584-1)
(Input temperature range is
selected by DIP switch setting.)
0 to 20 mA DC, 4 to 20 mA DC,
20 to 0 mA DC, 20 to 4 mA DC,
0 to 5 V DC, 1 to 5 V DC,
0 to 10 V DC, 10 to 0 V DC
(selected by DIP switch setting)
24 V DC 17
RTD Transducer K3FP-RS-UI PT100 Platinum Resistance
Thermometer
(Conforms to IEC 60751)
(Input temperature range is
selected by DIP switch setting.)
0 to 20 mA DC, 4 to 20 mA DC,
20 to 0 mA DC, 20 to 4 mA DC,
0 to 5 V DC, 1 to 5 V DC,
0 to 10 V DC, 10 to 0 V DC
(selected by DIP switch setting)
24 V DC 23
Repeater Power Supply K3FP-DY-I-I 0 (4) to 20 mA DC 0 (4) to 20 mA DC 24 V DC 30
Limit Value Switch K3FP-SL-UI 0 to 20 mA DC, 0 to 10 V DC
(selected by DIP switch setting)
SPDT output 24 V DC 33
To Next Page
Need help?
General
