Omron K3FP Series - Ordering Information; Ratings and Specifications; Model Number Structure

3-Way Signal Isolator K3FP-YV-I-I/K3FP-YV-U-U 3
3-Way Signal Isolator
K3FP-YV-I-I/K3FP-YV-U-U
6.2-mm Ultra-slim Isolator
• Isolates between input, output, and power supply. 1,500 V AC
dielectric strength.
• Close mounting.
• CE Marking compliant.
• UL certified.
Refer to Common Precautions on page 38.
Ordering Information
■ Isolator
■ Optional Products
Model Number Structure
DC Current Isolator
1. Model
2. Input or output signal
Current input
I: 0 (4) to 20 mA DC
Current output
I: 0 (4) to 20 mA DC
DC Voltage Isolator
1. Model
2. Input or output signal
Voltage input
U:
−10 (0) to 10 V DC
Voltage output
U:
−10 (0) to 10 V DC
Ratings and Specifications
■ Ratings and Specifications
Name Model
DC Current Isolator K3FP-YV-I-I
DC Voltage Isolator K3FP-YV-U-U
Name Model
DIN rail bus connector K3FP-1
12
K3FP-YV-I-I
12
K3FP-YV-U-U
Item Model K3FP-YV-I-I K3FP-YV-U-U
Supply voltage 24 V DC
Allowable supply
voltage range
80% to 125% of rated supply voltage
Current consumption 20 mA DC max. 10 mA DC max.
Power consumption 450 mW max. 200 mW max.
Error
±0.1% FS max.
Temperature
coefficient
Maximum: 0.01%/
°C max.,
Typical: 0.002%/
°C max. (at 23°C)
Cut-off frequency 100 Hz
Response time
(10% to 90%)
3.5 ms max.
Insulation resistance 10 M
Ω min. between inputs, outputs, and
power supply (at 500 V DC)
Dielectric strength 1,500 V AC, 50 Hz, 1 min (between inputs,
outputs, and power supply)
Noise resistance Conforms to IEC 61000
Ambient operating
temperature
−20 to 65°C
Ambient storage
temperature
−40 to 85°C
Ambient operating
humidity
95% max. (with no condensation)
0
4
8
12
16
20
4 8 12 16 20
Input current (mA) Input voltage (V)
−10
10
0
−10
100
K3FP-YV-I-I K3FP-YV-U-U
Output current (mA)
Output voltage (V)