30 Repeater Power Supply K3FP-DY-I-I
Repeater Power Supply
K3FP-DY-I-I
6.2-mm Ultra-slim Repeater Power Supply
• Isolates between input, output, and power supply. 1,500 V AC
dielectric strength.
• Close mounting.
• CE Marking compliant.
• UL certified.
Refer to Common Precautions on page 38.
Ordering Information
■ Repeater Power Supply
■ Optional Products
Model Number Structure
1. Model
2. Input Signal
I: 0 to 20 mA DC, 4 to 20 mA DC
3. Output Signal
I: 0 to 20 mA DC, 4 to 20 mA DC
Ratings and Specifications
■ Ratings and Specifications
Name Model
Repeater Power Supply K3FP-DY-I-I
Name Model
DIN rail bus connector K3FP-1
123
K3FP-DY-I-I
0
4
8
12
16
20
4 8 12 16 2
In
ut current
mA
K3FP-DY-I-I
Output current (mA)
Supply voltage 24 V DC
Allowable supply
voltage range
80% to 125% of rated supply voltage
Current consumption 40 mA DC max. (at 24 V DC, including
20 mA load current)
Power consumption 600 mA max.
Error
±0.2% FS max.
Temperature
coefficient
0.01%/
°C max., Typical: 0.002%/°C max.
(at 23
°C)
Cut-off frequency 100 Hz
Response time
(10% to 90%)
3.5 ms max.
Insulation resistance 10 M
Ω min. between inputs, outputs, and
power supply (at 500 V DC)
Dielectric strength 1,500 V AC, 50 Hz, 1 min (between inputs,
outputs, and power supply)
Noise resistance Conforms to IEC 61000
Ambient operating
temperature
−20 to 65°C
Ambient storage
temperature
−40 to 85°C
Ambient operating
humidity
95% max. (with no condensation)
Ambient storage
humidity
95% max. (with no condensation)
Connection method Screw connections (M3)
Tightening torque 0.5 N·m
Connecting
cable
Solid
wire
0.14 to 2.5 mm
2
Stranded
wire
0.2 to 2.5 mm
2
AWG 24 to 12
Wire
stripping
length
12 mm
Degree of protection IP20
To Next Page
Loading...
