Omron K3FP Series - Page 10

10 Dual Output 3-Way Signal Isolator K3FP-VS-UI-2I
Dual Output 3-Way Signal Isolator
K3FP-VS-UI-2I
6.2-mm Ultra-slim Dual Output 3-Way Signal
Isolator
• Outputs two isolated signals.
• Isolated between input, output 1, output 2, and between power
supply. 1,500 V AC dielectric strength.
• Close mounting.
• CE Marking compliant.
• UL certified.
Refer to Common Precautions on page 38.
Ordering Information
■ Isolator
■ Optional Products
Model Number Structure
1. Model
2. Input signal
UI: 0 to 20 mA DC, 4 to 20 mA DC, 0 to 10 V DC, 1 to 5 V DC (select
using DIP switch)
3. Output signal
2I: 0 to 20 mA DC, 4 to 20 mA DC (select using DIP switch)
Ratings and Specifications
■ Ratings and Specifications
Name Model
Dual Output 3-Way Signal Isolator K3FP-VS-UI-2I
Name Model
DIN rail bus connector K3FP-1
123
K3FP-VS-UI-2I
Supply voltage 24 V DC
Allowable supply
voltage range
80% to 125% of rated supply voltage
Current consumption 30 mA DC max.
Power consumption 600 mW max.
Error
±0.2% FS max., Typ. ±0.1% FS max.
Temperature
coefficient
Maximum: 0.01%/
°C max.,
Typical: 0.004%/
°C max. (at 23°C)
Cut-off frequency 35 Hz
Response time
(10% to 90%)
10 ms max.
Insulation resistance 10 M
Ω min. between inputs, outputs, and
power supply (at 500 V DC)
Dielectric strength 1,500 V AC, 50 Hz, 1 min (between inputs,
outputs, and power supply)
Noise resistance Conforms to IEC 61000
Ambient operating
temperature
−20 to 65°C
Ambient storage
temperature
−40 to 85°C
Ambient operating
humidity
95% max. (with no condensation)
Ambient storage
humidity
95% max. (with no condensation)
Connection method Screw connections (M3)
Tightening torque 0.5 N·m