To Next Page

HEM-907-STAND

ASSEMBLY INSTRUCTIONS

1. Failure to assemble and/or use as directed may result in

injury, and will void the user warranty.

2. Choose a level surface for assembling and using this

stand.

3. Follow each step in the sequence. Do not skip ahead.

4. Make sure all fasteners are secure.

5. Prior to use, test and inspect the stand to ensure smooth

operation.

6. Refer to additional warning notices and information

posted on the equipment.

WARNING

• Usingrmpressure,insertthepoleassembly(#3)intothecenterofthebase(#9)assembly.

• Onthebottomsideofthebaseplacethelargewasher(#10)onthebottomofthebasefollowedbythelock

washer(#11).Usethebolt(#12)tosecurethesepartsintoplacebyturningtheboltclock-wiseusingthesupplied

atwrench.

• Inserttheplatform(#1)ontopofthepole

assembly.Installscrew(#4)andwasher(#5)

and tighten it securely using the supplied Allen

wrench.Tightenthetwoscrews(#7)looselyuntil

both screws touch the pole. Once the screws are

touching the pole use the supplied Allen wrench to

tighten.

• Attachthebasket(#2)totheplatformusingthesut

under the platform.

• Usescrews(#8)toattachtheinstrumenttothe

stand. Please review the instrument instructions

prior to installation

Item Description Qty

1 Platform 1

2 Basket 1

3 Pole Assembly 1

4 Screw-Medium 3

5 Washer-Lock 1

6 Nut 2

7 Screw-Short 2

8 Screw-Long 2

9 Base W/Wheels 1

10 Washer-Large 1

11 Washer-Lock 1

12 Bolt 1

Omron HEM-907-STAND User Manual

Questions and Answers: