QUESTIONS & ANSWERS
How many times can I measure consecutively?
You can measure consecutively up to three times. After that the main unit will be warmed up and may
not be able to measure correctly. If you are going to measure more than four times, wait for ten
minutes, then measure again.
The temperature indicated is rather high. What are the causes?
1) The probe cover is broken.
2) The temperature measured under the arm is relatively lower. When measuring the temperature
under the arm, it is necessary to measure for ten minutes to obtain a correct value. When the
measuring time under the arm is short, the measured value tends to be low.
3) You used the thermometer that had been stored in the cold. Measure the temperature after leaving
the unit for more than thirty minutes in the room where you are going to take temperature. If you
store the unit in the room where you are going to measure the temperature, you can use the
thermometer immediately.
Is the temperature measured in the right ear different from that measured in the left ear?
For healthy people, there should be almost no difference in the measurement results. However, the
following conditions may cause differences in the readings:
1) The infrared sensor is not inserted in the same way.
2) Measurement is not conducted in a stable manner by inserting the unit at the same angle.Try to
measure in the ear that can show the highest measurement value constantly.
The temperature indicated is rather low. What are the causes?
To Next Page
Loading...
