16
R7 English
Time Screen
Time
You can change the time and date setting of your blood pressure
monitor. When reaching the time screen you will see the Gregorian
calendar. The year will be flashing.
1. By using the (
) buttons you can set the current year.
2. By pushing the SET button you will lock the year and proceed
to the next setting.
For setting the month, date and time repeat step 1 and 2. After
setting the minutes you will proceed to the DELETE DATA screen.
Delete data
In this screen you are able to delete all stored measurement from
you OMRON R7. Please be careful that deleted data cannot be
restored. The factory preset is NO. If you choose YES the monitor
will ask for a confirmation “ARE YOU SURE?”. To cancel select NO
to confirm DELETE DATA select YES.
After deleting all stored measurements the “Data Deleted Screen” will
be shown. All the stored measurements are deleted and the monitor
will be turned off.
If the stored measurements are not deleted you will proceed to the
RESET SETTINGS screen.
Reset settings
In this menu you can choose to reset all the settings to the “factory
preset” settings. The factory preset for this menu is NO. If you
choose YES by using the (
) button the monitor will ask you for a
confirmation “ARE YOU SURE?” After confirmation by selecting YES
all the settings will be changed to the factory mode.
The monitor will return to the AUTO MEMORY SCREEN. You can
turn off your monitor by pushing the on/off button.
All Memory Erasure
YES Screen
Are You Sure YES
Screen
Data Deleted (Blank)
Screen
Reset Settings YES
Screen
Are You Sure YES
Screen
HEM-637-E2 EN 7/8/10 9:18 AM Page 16
To Next Page
Loading...
Need help?
General
