18
USING THE MEMORY FUNCTION
2. Press the USER ID button to select the desired user (A or B).
3. Press the MEMORY button. The average value symbol will
display on the screen with the average reading for the
user ID selected.
NOTE: If there are no readings stored in memory,
the screen illustrated to the right
is displayed.
4.
Press the MEMORY button again to display the
most recent measurement values.
NOTE:
• Press the button repeatedly to display the next values.
• Press and hold the button to display the values faster.
Alternating Display
HEM-741REL 8-29 Final Rev 1/23/06 9:27 AM Page 18
To Next Page
Loading...
