To Next PageTo Next Page
Need help?Do you have a question about the Omron S8V-CP Series and is the answer not in the manual?
Highlights the simplified safety design for DC circuits, offering reliable protection against shorts or overcurrent.
Details the structure of model numbers, including codes for outputs and UL Class 2 certification.
Lists the available models based on the number of outputs and UL Class 2 output certification.
Explains how output current exceeding limits triggers tripping via a semiconductor switch.
Details over voltage tripping for the S8V-CP0424S model, activated above 28.8 VDC.
Describes the function and connection of the reset signal input terminal for resetting outputs.
Explains the alarm signal output function, which is turned OFF when any output trips.
Details the output status indicators (color, status) and transitions via push button or reset signal.
Illustrates the internal circuit connections for the S8V-CP0424 model.
Illustrates the internal circuit connections for the S8V-CP0424S model.
Illustrates the internal circuit connections for the S8V-CP0824 model.
Presents a general wiring diagram for connecting the S8V-CP to a power supply and loads.
Provides specific examples for wiring the reset signal input terminal correctly.
Details the terminal names, numbers, and their respective functions for different S8V-CP models.
Shows how total current capacity derates with ambient operating temperature for different models.
Illustrates tripping time versus output current for S8V-CP0424 and S8V-CP0824 models.
Details tripping characteristics based on input voltage and output current for the S8V-CP0424S.
Provides detailed physical dimensions and mounting information for the S8V-CP0424 model.
Provides detailed physical dimensions and mounting information for the S8V-CP0424S model.
Provides detailed physical dimensions and mounting information for the S8V-CP0824 model.
Details dimensions and specifications for aluminum mounting rails PFP-100N and PFP-50N.
Provides dimensions and specifications for the PFP-100N2 aluminum mounting rail.
Shows dimensions and mounting details for the PFP-M end plate.
Explains CAUTION and other warning symbols used to indicate potential hazards.
Provides guidelines on safe product usage to prevent minor injury or property damage.
Offers advice to prevent product failure, malfunction, or undesirable effects on performance.
Defines the meaning of safety symbols such as caution for electric shock and high temperatures.
Specifies temperature, humidity, and environmental conditions for product operation and storage.
Advises on avoiding vibrations, shocks, and high-frequency noise during installation.
Guidance on proper mounting for heat dissipation and ensuring long-term reliability.
Provides essential wiring guidelines, including wire types, stripping lengths, and connection methods.
Specifies recommended wire stripping lengths for general terminal blocks.
Details recommended wire stripping lengths specifically for power input terminal blocks.
Discusses input voltage requirements, over-voltage tripping, and DC input operation.
Advises on selecting an input power supply considering overcurrent protection and voltage drops.
Explains factors affecting tripping performance, including reset, constant power loads, and temperature.
Outlines precautions for performing dielectric strength tests, noting insulation limitations.
Warns about potential damage to the selector switch if excessive force is applied.
Provides precautions for connecting backup devices to the S8V-CP, noting potential degradation.
Details the procedure for mounting the S8V-CP0424/S8V-CP0424S and S8V-CP0824 on a DIN rail.
Explains the correct method for connecting wires with ferrules and solid wires to terminal blocks.
Provides a step-by-step guide for connecting stranded wires using a flat-blade screwdriver.
Advises on how to gently pull wires to ensure they are securely fastened to the terminal block.
Details the procedure for safely removing wires from the push-in plus terminal block.
Lists recommended ferrules and their applicable wire sizes for all terminal blocks.
Specifies recommended ferrules and crimping tools for the power input terminal block.
Lists recommended flat-blade screwdrivers for connecting and removing wires.
Provides guidelines for preventive maintenance and recommended replacement periods for the product.
Outlines the exclusive warranty provided by Omron and limitations thereof.
Specifies limitations on Omron's liability for damages related to the product.
Clarifies buyer's responsibility for determining product suitability for their application.
States Omron's non-responsibility for user programming of programmable products.
Explains that performance data is a guide and does not constitute a warranty.
Informs about potential changes in product specifications and part numbers.
Disclaims responsibility for clerical, typographical, or proofreading errors.
General| Brand | Omron |
|---|---|
| Model | S8V-CP Series |
| Category | Circuit breakers |
| Language | English |
