OMT STAND.MOVE M1.0 - 2 Explanation of Terms and Index of Abbreviations

STAND: 17.06.2019 9910_Operation-Manual_STANDMOVE_M1-0_Rev1v0_EN Seite 4 von 23
2 Explanation of terms and index of abbreviations
Abb./Term
Meaning
OMT
Oelschläger Metalltechnik GmbH
Controler
Table controller STAND.CONTROL C1 or C2
Reset position
Lowermost mechanical end position of the table
Minimal position
Lowermost software end position of the table