1. Remove and recycle or discard all stickers,
descriptive labels, cable ties and packing
materials, including static stickers and hangtags
with ties.
2. Wipe body of Kettle with a soft, damp cloth.
Rinse inside and dry thoroughly.
CAUTION: Do not use abrasive pads, harsh chemicals or spray cleaner chemicals
to clean. These may damage the surface of the appliance.
3. Fill your Kettle with cold water to the “MAX”
level, complete one boiling cycle, and then
discard water.
1. Press button at top of handle to open lid, then
ll Kettle with water. Press lid closed.
2. Place Kettle securely on base.
3. Plug power cord into 110V outlet.
4. Turn Kettle on by pressing down
on the switch at the bottom of the
handle. The switch will illuminate.
5. To learn more about how to
use your Kettle, check out “The
Particulars of Boiling Water”
on pg. 9.
See pg. 10 to learn how to descale your
Kettle, as well as other use and care
information. (Descaling is a simple
process required for all kettles to
maintain long-term heating efficiency.)
Before We Begin Quick Start Guide
65
To Next Page
Loading...
Need help?
General