RETURNING ENGINE
TO
SERVICE
1.
Remove the cover and
all
protective wrapping.
Remove the plug from exhaust outlet.
2.
Check the tag
on
the oil base and verify that oil
weight is
stili
correct for the existing ambient
temperatures.
4.
Check the fuel filter and lines
to
make sure they
5.
Check that the carburetor throttle lever and
6.
Connect the battery cables, positive
(+)
cable
first.
7.
Start the engine. Exhaust smoke
is
normal
when the engine is started, due to the
rust
inhibitor oil.
are secure and have no cracks
or
leaks.
.l
.
governor linkage move freely.
3.
Clean and check the battery (if equipped).
8
To Next Page
Loading...
Need help?
General
