Onan MCCK - Page 6

OPTIONAL EQUIPMENT
1. REMOTE START-STOP SWITCH
SPDT, momentary contact, center-off type.
2. SWITCH80ARD w , _ . .
Instruments to read ac amperes, and ac volts, and to break overloaded ac circuit.
Desirable information for operator. For wall mounting.
3. INSTRUMENT PANEL .
Part of plant control box assembly. Instruments to read ac amperes and ac volts,
and to break overloaded ac circuit. Desirable information for operator. Plants with
instrument panel have no room for optional ac receptacles.
4. AC RECEPTACLES
Convenience for plugging in ac loads. Plants with ac receptacles have no room for
optional instrument panel.
5. AUTOMATIC DEMAND CONTROL
Starts and stops plant automatically.
6. CONTROL-O-MATIC j ..
A ^-function automatic control which automatically starts and stops plant, supplies
current on demand and automatically runs bilge blower.
7. LOAD TRANSFER CONTROL
Controls running of plant and transfers load.
8 . HEAT EXCHANGER COOLING
Closed system using fresh water in plant.
9. LOAD TRANSFER SWITCH
Three-pole, three-position to select generator or shore power.
10 .
AQUA LIFT MUFFLER t ,
High-efficiency silencer for plants which discharge cooling water into exhaust.
able for above or below water-line installation.
Suit-
11. SEPARATE FUEL TANK
Various sizes.
12. EXHAUST LINE TEMPERATURE SWITCH
Shuts down plant if water flow fails.
13. OTHER
See your dealer.
r
5