EasyManua.ls Logo

Onan MDKBP

Onan MDKBP
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Caution: This document contains mixed page sizes (8.5 x 11 or 11 x
17), which may affect printing. Please adjust your printer settings
according to the size of each page you wish to print.
Redistribution or publication of this document, 
by any means, is strictly prohibited.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Onan MDKBP and is the answer not in the manual?

Onan MDKBP Specifications

General IconGeneral
Fuel TypeDiesel
Voltage120/240V
Frequency60 Hz
PhaseSingle-Phase
Engine TypeDiesel

Summary

SAFETY PRECAUTIONS

ENGINE EXHAUST IS DEADLY

Hazards associated with engine exhaust, including carbon monoxide poisoning symptoms.

GENERATOR VOLTAGE IS DEADLY

Precautions regarding generator electrical output connections and working with live equipment.

DIESEL FUEL IS COMBUSTIBLE

Warnings about handling diesel fuel, ignition sources, and fuel line security.

MOVING PARTS CAN CAUSE SEVERE PERSONAL INJURY OR DEATH

Safety guidelines for operating machinery with moving parts, avoiding loose clothing.

BATTERY GAS IS EXPLOSIVE

Precautions when working with batteries, including safety glasses and proper cable disconnection.

3. Operation

STARTING THE GENSET

Step-by-step instructions for starting the genset from control panels and warm-up procedures.

4. Periodic Maintenance

5. Genset Control

7. Generator

8. Reconfiguring Voltage and Frequency

9. Troubleshooting

TROUBLESHOOTING WITH DIGITAL DISPLAY

How to diagnose faults using the e-Series Digital Display's fault codes and descriptions.

TROUBLESHOOTING WITH STATUS LAMP

Interpreting blinking patterns of the status lamp on the control switch for fault diagnosis.

NO RESPONSE AT DIGITAL DISPLAY OR CONTROL SWITCH

Corrective actions for gensets with no response from controls or displays, including battery checks.

HIGH ENGINE TEMPERATURE-CODE NO. 1

Troubleshooting steps for high engine temperature shutdowns, including coolant and water flow checks.

LOW OIL PRESSURE-CODE NO. 2

Corrective actions for low oil pressure shutdowns, focusing on oil level and sender checks.

STARTING FAULT-CODE NO. 32

Troubleshooting steps for starting faults where cranking speed is not detected.

Related product manuals