To Next PageTo Next Page
Need help?Do you have a question about the Onbone A001 and is the answer not in the manual?
Provides heating durations for different material thicknesses: 1mm Ribbon (3-5 min), 2mm/2mm Soft (8-10 min), 4mm (15-20 min).
Details the temperature adjustment buttons and indicator lights for setting heating levels.
Advises against using defective parts, improper cords, leaving the device on, and reheating already molded splints.
Outlines safe cleaning procedures using damp cloths and mild detergents, avoiding abrasives.
Instructs users to unplug the device and contact a sales representative for issues.
Details the 1-year warranty and proper disposal as electrical waste.
Lists power supply, output power, weight, operating conditions, and safety standards.
General| Power | 1500W |
|---|---|
| Thermostat | Adjustable |
| Safety Features | Overheat Protection, Tip-Over Switch |
| Voltage | 120V |
| Heating Area | 150 sq. ft. |
