EasyManua.ls Logo

One for All 14450 - Signal Level Indicator; Antenna Positioning Methods

One for All 14450
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Decide how you would like to position the antenna:
STANDING UPRIGHT, WALL MOUNTED or FLAT.
When you choose for STANDING UP, please use the included 2 stands
and insert it into the 2 slots on the bottom of the rear of the antenna.
When mounting to an interior wall, you have to drill 2 holes in your wall
whereas the distance between the center of the holes should be 178 mm
(7 inches). Put the plugs in the holes and put the screws in the plugs.
We do suggest you to FIRST  nalize this set up before drilling holes, since
you might need to re-position the antenna for best reception.
Position the antenna as high as possible and move close to or in a window
and facing the direction of the TV towers for best reception.
I
GOOD BETTER BEST
This antenna has a unique Signal Level Indicator, which clearly shows the
current strength of incoming TV signals. The more LEDs lighting up, the
stronger the signal. PLEASE NOTE: You may live in a weak signal area
where the incoming signals are not at full strength so not every LED
will light up, however it may still be su cient to receive channels in
good quality.
Esta antena cuenta con un Indicador de nivel de señal, el cual muestra claramente la
intensidad actual de las señales de TV entrantes. Cuantos más LEDs se iluminen, más
fuerte será la señal. FAVOR DE TOMAR EN CUENTA: Puede vivir en un área de señal
débil en donde las señales entrantes no tengan la su ciente intensidad por lo
que no todos los LEDs se iluminarán, sin embargo, puede ser su ciente para la
recepción de canales en buena calidad.
3

Related product manuals