10
Home
Hints:
• If the red LED shows one long blink at step 4, the function was not learned correctly, please try again
from step 2.
• If you find one or more keys don’t work properly after set up, you can re-enter the learning mode at any
time by repeating the procedure from step 1.
• To delete a learned function, hold down 7 ( ) and 9 ( ) until the red LED blinks twice, and press the
key to delete twice.
• If one or more of your original remotes aren’t working, you can still set up the One For All remote by
SimpleSet (A) or Code Set Up (B).
* Some remotes send commands differently. If you find a function cannot be learned, try holding down
the key on the original remote instead of pressing and releasing.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
